Specifications for
Metro
Available Color Offerings : "Frost" / "Butterfield" / " Toffee" / " Pear" / "Cherry" / "Victorian"
[ $$ PRICING IS 10% HIGHER THAN SHAKER $$ ]
FACE FRAMES (MAPLE)
Mortise and Tenon, Glued and Fastened
Horizontal Rails 3/4" X 1 1/2" Kiln Dried "Maple" Hardwood
Vertical Stiles 3/4" X 1 1/2" Kiln Dried "Maple" Hardwood
CABINET ENDS
Exposed Ends are 1/2", 45# Premium Particle Board
All Wall Cabinet Ends Rabbeted to Receive Tops & Bottoms
Base Cabinet Ends are Rabbeted to Receive Floor and Shelf
CABINET DOORS and DRAWER HEADS
Doors - 5/8" thick, Solid one piece (Slab) Engineed Wood core with a Maple Veneer surface. Wood Edgebanding
Drawer Heads - 5/8" thick, Solid one piece (Slab) Engineed Wood Core with a Maple Veneer surface. Wood Edgebanding
DRAWERS
7/16" Fiberboard Basecoated, Printed, Topcoated (4 Sides)
Bottom 1/8" Hardboard, Matches Interior
Sides are Rabbet Joint Machined all Four (4) Sides
All Joints Glued and Power nailed
WALL CABINET & BASE CABINET SHELVING
Shelving 5/8" Premium Particle Board with Front Edge Smooth, Fully Adjustable in all Wall Cabinets
Due to Plumbing Considerations, There is No Shelving in Sink Base
Base Shelf is Half Depth, Fully Adjustable
WALL CABINETS TOP & BOTTOM
Wall Cabinets Not Less Than 1/2" 45# Particleboard
Let into Sides and Face Frame. All Joints Glued and Power Nailed.
BASE CABINET FLOORS
Base Cabinet Not Less Than 1/2" 45# Particleboard
Let into Sides and Face Frame. All Joints Glued and Power Nailed. Back of Floor Set On Supporting
Member, Glued and Fastened.
HARDWARE
Self-Closing 108* Opening, Concealed Hinges
Drawer Slides - Side Mounted, 75# Load Capacity, Epoxy Coated, Lifetime Warranty
CABINET BACKS
Backs are 1/8" Printed (HDF) High Density Fiberboard
FINISH
Conversion Varnish - A Hard Durable Finish That is Non-Yellowing and Offers Excellent Chemical Resistance
All Exposed Interior Sides, Shelving and Wall Cabinet Bottoms, GrandLam Clad (Except Hang Rails)
Cabinet Has Been Tested and Certified by National Kitchen Cabinet Association (Spec. ANSI 161.1)
DUE TO THE AVAILABILITY OF CERTAIN MATERIALS SOME
SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE