FACE
FRAMES (Oak)
-
Mortise and
tenon, glued and fastened
-
Horizontal
rails 3/4" x 1-1/2" kiln dried hardwood
-
Vertical
stiles 3/4" x 1-1/2" kiln dried hardwood
CABINET
ENDS
-
Exposed
ends 1/2" 45# premium particle board
-
All wall
cabinet ends rabbeted to receive tops, bottoms
-
Base
cabinet ends are rabbeted to receive floor and intermediate shelf
CABINET
DOORS AND
DRAWER HEADS
-
5/8"
Grandlam Panel on Woodgrain, White, or Almond laminate.
-
A sandwich
of melamine resin impregnated paper, on a Type 1 B2 mat-formed 45#
density industrial grade particle board core, bonded together using
heat and pressure. Edges banded with PVC, applied with hot
melt system.
DRAWERS
-
7/16"
fiberboard basecoated, printed, topcoated (4 sides)
-
Bottom
1/8" hardboard, matches interior Sides rabbet joint machined
all four corners
-
All joints
glued and power nailed
|
WALL CABINET AND BASE CABINET
SHELVING
- Shelving 5/8" premium particle
board with front edge smooth, fully adjustable in all wall cabinets
- Due to plumbing considerations, there
is no shelving in sink bases or vanities
- Base shelf is half depth
WALL CABINETS TOP AND BOTTOM
- Wall cabinets not less than 1/2"
45# particle board
- Let into sides and face frame All
joints glued and power nailed
BASE CABINET FLOORS
- Base cabinet not less than 1/2"
45# particle board
- Let into sides and face frame All
joints glued and power nailed Back of floor set on supporting
member, glued and fastened
HARDWARE
- Self-Closing, 110 degree opening
concealed hinges.
- Drawer slides - side mount, 75 Ib load
capacity, epoxy coated, self-closing
CABINET BACKS
- All back are 1/8" standard
hardboard
FINISH
- Conversion Varnish -a hard durable
finish that is non-yellowing and offers excellent chemical
resistance
- All exposed interior sides, shelving
and wall cabinet bottoms, GrandLam clad (except hang rail)
- Cabinet has been tested and certified
by National Kitchen Cabinet Association as meeting American National
Standards Institute specifications ANSI 1611
|
